What is ring spinning process

Spread the love

What is ring spinning process:


The spinning department is the last process of making yarn from fiber. The yarn is made by reducing the weight of a single length of roving obtained from Simplex. The machine on which the yarn is made in the spinning section is called the ring-spinning frame. The spinning frame has a ring around the bobbin. Around the ring, there is a traveler’s holder which holds the traveler. The traveler rotates on the ring and the yarn produced gets entangled in the bobbin. This spinning frame is called Ring Spinning Frame because the yarn is produced through the ring in this frame. https://bdfabric.com/basic-principles-of-combing-process/

Ring spinning is the only machine that can make yarn from almost all types of fibers. The process of making yarn by ring spinning is usually simple and the cost of the machine is also relatively low. Count ranges from 6/1 Ne to 140/1 Ne are easy to use, as the yarn from the ring bobbin is extremely easy to carry. https://bdfabric.com/different-working-parts-of-the-combing-machine/

Definition of Spinning:

Spinning is the process by which different types of textile fibers twist fibers through different processes in the processing industry to produce usable endless minimum strength yarns.

Ring Spinning Machine

The length and strength of the fiber are the main qualities of yarn making. However, in the case of synthetic fibers, length does not matter, it can be of any length. Filament fibers are usually unbroken. But first of all, let’s talk about spinning. We understand the preparation of yarn from cotton. Spinning is also called weaving in Bengali. However, the direct meaning of spinning is the preparation of yarn. The definition of yarn can be given in this way. Yarn is the use of textile fiber in the industry through the spinning process to provide a twist to the almost parallel fibers with a minimum strength without endless use.

Purposes of Ring spinning frame:

The purpose of the spinning frame is as follows:

1. Converting the roving obtained from Ring Simplex into yarn by reducing the weight of a single length.

2. Provide the required amount of twist along the axis of the yarn to hold the fiber and increase the strength of the yarn.

3. The yarn is wrapped in a suitable size package to facilitate easy transfer of the yarn produced.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *