What are advantages and disadvantages of Stitch

Spread the love

Definition of stitches

What are the advantages and disadvantages of Stitch? Sewing and stitching are inextricably linked. One of them cannot be made without the other. Therefore one or more yarns or loops of yarn are sewn together by Intralooping, Interloping, or interlacing, and this unit of stitching is called stitch. When a loop of yarn passes through another loop of the same yarn, it is called intralooping. When one yarn passes over another yarn or yarn loop, it is called interlacing. When one thread loop passes through another thread loop, it is called interloping. When one layer of fabric is sewn, it is called stitch, such as knitting, hem, etc.https://bdfabric.com/sewing-defects-in-garments/

(A) What are advantages and disadvantages of Stitch-Chain stitch:


1. It is quite useful for attaching clothes temporarily.

2. Elastic yarn on the cuffs and waist is sewn using a machine with multiple needles to create a gathered appearance.

3. It is used to make ham.


1. The safety of chain stitch is very low i.e. less durable.

2. When the stitch is torn, the whole stitch is opened.

(B) advantages and disadvantages of Stitch-Hand stitch:


1. Needle yarn is passed from one side to the other through the fabric and the line of sewing is made.

2. This stitch is used to make expensive clothes.

3. Beautiful sewing lines are created on the surface of the fabric, which is beautiful to look at.


1. The sewing speed is extremely low, so the production is relatively low.

2. Less used to make ordinary clothes.

3. Special types of needles such as needles with thin ends and needle eyes in the middle are used.

(C) Lock stitch:


1. Adequate strength and expansion capacity are available in the stitch.

2. The stitches look the same from both sides of the fabric.

3. Stitches are safe, that is, they do not open easily.

4. The stitches are made by immersing the fabric in the fabric to make abrasion-resistant stitches.

5. It is used to attach pockets, collars, cuffs, casing, etc.


1. The bottom yarn or bobbin thread is supplied with the help of a bobbin, the size of the bobbin is quite small so it contains a small amount or short length of yarn.

2. Sewing with two needles side by side is very difficult.

3. The elasticity quality of the stitch is quite low, which makes it inconvenient to sew knitted fabrics.

(D) Multi-thread chain stitch:


1. The strength of such stitches is much higher.

2. It is less likely to seam puckering.

3. The yarn in the bobbin does not run out quickly as the yarn of both groups is supplied from the yarn cone.


1. The use of two groups of yarns is troublesome as a result.

2. 1 cm at the end of the stitch. The chain has to be kept or the yarn can be untied.

(E) Overedge stitch:


1. When stitching is done, a group of yarn loops around the edges of the fabric so that the fabric yarn comes out.

2. It is mainly used for knitting the edges of fabrics and making seams in knitted fabrics.

3. The elasticity of the stitch is very good.

4. The edges of the fabric are used for decoration.

5. Very useful for sewing denim, jeans, corduroy.


1. Not used for ordinary stitch.

2. This requires a skilled operator.

3. Extra chains are to be placed at the ends of the stitches.

(F) Covering chain stitch:


1. Flat lock or knitted fabric is especially used for sewing such as underwear.

2. Used for decoration in the case of laser wire.

3. Lace, bread, elastic, etc. are used for attachment to fabrics.

4. Used to make decorative stitch for making cover stitch on the edges of the fabric and to make the topstitch.


1. Not suitable for general sewing.

2. This is a complex type of stitch as it requires a maximum of 9 yarns to make the stitch.

3. The need for a skilled operator falls.

Similar Posts

One Comment

Leave a Reply

Your email address will not be published. Required fields are marked *